Home | Contact Me | Helpful Links  

Current Project 
  RMU Unit

Site Nav 
List of Projects  
  Backup Instrument
  Flight Guidance Cntl
  Display Cntl Panel
  Glare Lightg Panel
  Throttle Control
  Flap Actuator
  Airbrake Actuator
  Clock/Timer Panel
  FSBus IO Cards
  Overhead Panels
  Yoke System
  Rudder Pedals

Simulator / Cockpit Building Links
Links Added/Updated Mar 6, 2016

Microcontoller Networks
Microcontoller Stuff

Other Simulator Projects - In no order
Shoot me a note and I'll add yours

Embeded Systems Related Sites

Simulator Related Forums



Glass Cockpit Software


Multiple Monitor Visual Software


Interface Cards / Software


Misc Sim Components


FSUIPC - Peter Dawson

-- Sim Pit Projects of Note --

-- Hard To Find Parts --

-- If You Want To Learn Stuff --

Jan 18, 2018 
- 2018 - start again .. 1/18/18
- New MFD PDF Doc. 03/27/17
- 1st Frame Test Cut 05/19/16
- New PFD Material List 05/2/16
- New PFD Drawings 04/18/16
- esp8266 Modules 03/23/16
- Keyboard Emulator 03/07


Sim Objectives
(Revised June 2016)

1. Immersive. To be fully immersive, the sim will need to be enclosed and provide multiple environment views.

2. Portable. The ability to move the sim with components fitting through standard doors. The enclosure will have to be modular with a maximum width of 32 inches per module.

3. Samll Footprint. I don't want the sim to take up an entire room. Will make every effort to have the entire sim enclosure fit on a sheet for 4 ft x 8 ft plywood. This will necessitate a single seat, half cockpit sim.

4. Functional, in substantial conformance with the processes and procedures of the real aircraft.

5. Accuracy. While some sim builders hold to a very high standard of accuracy and scale, my goal will be the appearance of accuracy is sufficient. Where deviations from scale are necessary, they are acceptable.

Home | Contact Me | Helpful Links  

Large Visitor Map

Copyright 2005-2018 all rights reserved